หน้า: 1 [2] 3 4 ... 6   ลงล่าง
  พิมพ์  
ผู้เขียน หัวข้อ: บทความ : GIGABYTE P67A-UD7 Motherboard Review  (อ่าน 25721 ครั้ง)
0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้
อิมพีเรียล
สมาชิกกลุ่ม ยสตน.
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 230



« ตอบ #15 เมื่อ: 09 มกราคม 2011, 15:40:21 »

โอ้  gold saint ราศี gigabyte  lol lol lol
บันทึกการเข้า

PatRaceTin
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 364



« ตอบ #16 เมื่อ: 09 มกราคม 2011, 15:42:27 »

ข่าวของฝรั่งทำให้ผม งง

ว่ามันขึ้นกับ ตัว CPU ด้วยรึ???


Here is an excerpt from an ASUS overclocking guide provided to us about the percentage of processors that overclock to a certain frequency from a total of 100 Sandy Bridge processors:

จากการทดสอบซีพียู 100 ตัว
Results are representative of 100 D2 CPUs that were binned and tested for stability under load; these results will most likely represent retail CPUs.

1. Approximately 50% of CPUs can go up to 4.4-4.5 GHz

2. Approximately 40% of CPUs can go up to 4.6-4.7 GHz

3. Approximately 10% of CPUs can go up to 4.8-5 GHz (50+ multipliers are about 2% of this group)

Additionally it is recommended to keep 「C1E」and「EIST」option enabled for the best overclock scaling. This is different than previous Intel overclocking expectations where the best scaling was with disabled power states or power management options."
บันทึกการเข้า

Intel Core i5-2500K + Asus P8P67 Deluxe + Mushkin BlackLine 2133C10 (Hynix-BFR) 8GB + Asus 7970 DCU2 TOP& VGA SupremeHF + WD 320AAKS x2 + Samsung S22A300B + Antec 1200W OC Version + ชุดน้ำ EKSupremeHF + Swiftech655/XSPC Res&Top + BlackIce GTX360 + NMB-MAT 12cm. x3 + Lamptron FC-2
idirex2000
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 3822



อีเมล์
« ตอบ #17 เมื่อ: 09 มกราคม 2011, 15:53:16 »

แรงจริงๆของบอกกก great great great
บันทึกการเข้า
tpp
True Love Always
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 8402



อีเมล์
« ตอบ #18 เมื่อ: 09 มกราคม 2011, 18:44:02 »

ข่าวของฝรั่งทำให้ผม งง

ว่ามันขึ้นกับ ตัว CPU ด้วยรึ???


Here is an excerpt from an ASUS overclocking guide provided to us about the percentage of processors that overclock to a certain frequency from a total of 100 Sandy Bridge processors:

จากการทดสอบซีพียู 100 ตัว
Results are representative of 100 D2 CPUs that were binned and tested for stability under load; these results will most likely represent retail CPUs.

1. Approximately 50% of CPUs can go up to 4.4-4.5 GHz

2. Approximately 40% of CPUs can go up to 4.6-4.7 GHz

3. Approximately 10% of CPUs can go up to 4.8-5 GHz (50+ multipliers are about 2% of this group)

Additionally it is recommended to keep 「C1E」and「EIST」option enabled for the best overclock scaling. This is different than previous Intel overclocking expectations where the best scaling was with disabled power states or power management options."


อันนี้ไม่ทราบครับ คือที่ทีมเราได้เล่นตอนนี้เนี่ย 2600K สองตัวก็ไปได้พอๆกันครับ น่าจะเป็นที่ Bios ด้วย เพราะเห็นความต่างค่อนข้างมากครับระหว่าง Bios ตอนเมื่อก่อนปีใหม่กับล่าสุด
บันทึกการเข้า
Venom-Crusher
สมาชิกกลุ่ม ยสตน.
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 15962


I'm Stand Between Hell and Earth.


เว็บไซต์
« ตอบ #19 เมื่อ: 09 มกราคม 2011, 19:19:00 »

ข่าวของฝรั่งทำให้ผม งง

ว่ามันขึ้นกับ ตัว CPU ด้วยรึ???


Here is an excerpt from an ASUS overclocking guide provided to us about the percentage of processors that overclock to a certain frequency from a total of 100 Sandy Bridge processors:

จากการทดสอบซีพียู 100 ตัว
Results are representative of 100 D2 CPUs that were binned and tested for stability under load; these results will most likely represent retail CPUs.

1. Approximately 50% of CPUs can go up to 4.4-4.5 GHz

2. Approximately 40% of CPUs can go up to 4.6-4.7 GHz

3. Approximately 10% of CPUs can go up to 4.8-5 GHz (50+ multipliers are about 2% of this group)

Additionally it is recommended to keep 「C1E」and「EIST」option enabled for the best overclock scaling. This is different than previous Intel overclocking expectations where the best scaling was with disabled power states or power management options."


ผมก็กำลังรู้สึกอย่างนั้นครับ เง้ออออ drunk
บันทึกการเข้า



It's hard to be righteous, but it easy to be evil.
konlaos
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 111


« ตอบ #20 เมื่อ: 10 มกราคม 2011, 01:21:40 »

เหอะๆ 5.0 เจอ10ใน100 อย่างนี้จะไม่พอกันจดweekกันก่อนไปซื้อเลย  out
บันทึกการเข้า
MatooM
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 168


อีเมล์
« ตอบ #21 เมื่อ: 10 มกราคม 2011, 13:28:50 »

06 กะ vantage แรงมั่กๆครับน้า

580 ใบเดียว 36.5 K  gasp gasp
บันทึกการเข้า
BellZebub
Registered User
*
ออฟไลน์ ออฟไลน์

กระทู้: 22


อีเมล์
« ตอบ #22 เมื่อ: 10 มกราคม 2011, 15:53:33 »

อยากขาย ชุด i7 (950) ทิ้งซะละ ลากไกลแรงดีเหลือเกินมี nf200ด้วย sli แร๊งแรง อิอิ ถามนิดนึงครับ
           i7 ซีรี่ส์ 9 (ไม่นับ westmere เพราะมัน 6 คอร์) กะ i7 sandy bridge ใครแรงกว่ากันอ่า  rules
บันทึกการเข้า
BellZebub
Registered User
*
ออฟไลน์ ออฟไลน์

กระทู้: 22


อีเมล์
« ตอบ #23 เมื่อ: 10 มกราคม 2011, 15:55:23 »

รึว่าผมจรอ ivy bridge ดีครับแนะนำหน่อย (ซื้อของใส่คอมเสียเงินเพราะเวปพี่ๆนี่แหละ 555) lol
บันทึกการเข้า
BellZebub
Registered User
*
ออฟไลน์ ออฟไลน์

กระทู้: 22


อีเมล์
« ตอบ #24 เมื่อ: 10 มกราคม 2011, 16:30:09 »

รบกวนสอบถามอีกรอบนะครับ ผมใช้ psu antec tpq 1000w เวลาเปิดเครื่องมันมีเสียงดังจิ๊ดๆๆ ออกมาจากตัว psu ครับมันเป็นอะไรอ่า
-รึผมต้องซื้อ ups  tuxout



ปล.ไม่รู้จะโพสตรงใหนไปไม่ถูก รบกวนตรงนี้ละกันนะครับ หรือถ้ามีที่ก็โพสบอกเลยนะครับเดี๋ยวพร่งนี้มาดู ขอบคุณสำหรับคำตอบนะครับ  heart
บันทึกการเข้า
Venom-Crusher
สมาชิกกลุ่ม ยสตน.
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 15962


I'm Stand Between Hell and Earth.


เว็บไซต์
« ตอบ #25 เมื่อ: 10 มกราคม 2011, 16:48:09 »

อยากขาย ชุด i7 (950) ทิ้งซะละ ลากไกลแรงดีเหลือเกินมี nf200ด้วย sli แร๊งแรง อิอิ ถามนิดนึงครับ
           i7 ซีรี่ส์ 9 (ไม่นับ westmere เพราะมัน 6 คอร์) กะ i7 sandy bridge ใครแรงกว่ากันอ่า  rules

ผมว่าแซนดี้โดยรวมแรงกว่านะครับ

รึว่าผมจรอ ivy bridge ดีครับแนะนำหน่อย (ซื้อของใส่คอมเสียเงินเพราะเวปพี่ๆนี่แหละ 555) lol

น่าจะอีกนานนะครับ อิอิกำ

รบกวนสอบถามอีกรอบนะครับ ผมใช้ psu antec tpq 1000w เวลาเปิดเครื่องมันมีเสียงดังจิ๊ดๆๆ ออกมาจากตัว psu ครับมันเป็นอะไรอ่า
-รึผมต้องซื้อ ups  tuxout



ปล.ไม่รู้จะโพสตรงใหนไปไม่ถูก รบกวนตรงนี้ละกันนะครับ หรือถ้ามีที่ก็โพสบอกเลยนะครับเดี๋ยวพร่งนี้มาดู ขอบคุณสำหรับคำตอบนะครับ  heart

แบบนี้สงสัยต้องลองเอาไปเคลมดูล่ะครับสำหรับ PSU
บันทึกการเข้า



It's hard to be righteous, but it easy to be evil.
shottoonez
Registered User
*
ออฟไลน์ ออฟไลน์

กระทู้: 1


« ตอบ #26 เมื่อ: 10 มกราคม 2011, 17:11:25 »

ขอบคุณมากๆ ครับ ผมว่าจะซื้ออีกไม่เกิน 10วันนี้ครับ รอดู i7 2600K ก่อนครับ ว่าได้ Sink + Fan ตัวไหนมา

จาก Review ที่ได้ดูมา เห็นว่าได้ตัวเดียวกับ i7 980X ครับ แล้วที่พี่ซื้อมาเป็นตัวไหนหรอครับ ตัวใหญ่เลยป่าว

แบบหน้านี้ แต่อันข้างล่างรึป่าวครับ http://www.vmodtech.com/main/article/the-sandy-bridge-review-intel-core-i7-2600k-and-core-i5-2500k-tested/2/

แล้วภาคจ่ายไฟ 24เฟส ควรใช้ PSU กี่วัตต์ครับผม ช่วยแนะนำด้วยครับ ขอบคุณมากๆครับ
« แก้ไขครั้งสุดท้าย: 10 มกราคม 2011, 17:18:51 โดย shottoonez » บันทึกการเข้า
Venom-Crusher
สมาชิกกลุ่ม ยสตน.
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 15962


I'm Stand Between Hell and Earth.


เว็บไซต์
« ตอบ #27 เมื่อ: 10 มกราคม 2011, 18:04:55 »

ขอบคุณมากๆ ครับ ผมว่าจะซื้ออีกไม่เกิน 10วันนี้ครับ รอดู i7 2600K ก่อนครับ ว่าได้ Sink + Fan ตัวไหนมา

จาก Review ที่ได้ดูมา เห็นว่าได้ตัวเดียวกับ i7 980X ครับ แล้วที่พี่ซื้อมาเป็นตัวไหนหรอครับ ตัวใหญ่เลยป่าว

แบบหน้านี้ แต่อันข้างล่างรึป่าวครับ http://www.vmodtech.com/main/article/the-sandy-bridge-review-intel-core-i7-2600k-and-core-i5-2500k-tested/2/

แล้วภาคจ่ายไฟ 24เฟส ควรใช้ PSU กี่วัตต์ครับผม ช่วยแนะนำด้วยครับ ขอบคุณมากๆครับ


ซิงค์ที่แถมกะ 2600K มา มันเป็นซิงค์ตัวเล็กครับ อยากแรงต้องซื้อซิงค์เพิ่มล่ะครับ อิอิ ส่วนขนาดพาวเวอร์เอาตามการ์ดจอก็พอครับ การ์ดรุ่นใหญ่ๆก็ควร5-6ร้อยวัตต์ขึ้นไปครับ
บันทึกการเข้า



It's hard to be righteous, but it easy to be evil.
tpp
True Love Always
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 8402



อีเมล์
« ตอบ #28 เมื่อ: 10 มกราคม 2011, 18:12:09 »

ขอบคุณมากๆ ครับ ผมว่าจะซื้ออีกไม่เกิน 10วันนี้ครับ รอดู i7 2600K ก่อนครับ ว่าได้ Sink + Fan ตัวไหนมา

จาก Review ที่ได้ดูมา เห็นว่าได้ตัวเดียวกับ i7 980X ครับ แล้วที่พี่ซื้อมาเป็นตัวไหนหรอครับ ตัวใหญ่เลยป่าว

แบบหน้านี้ แต่อันข้างล่างรึป่าวครับ http://www.vmodtech.com/main/article/the-sandy-bridge-review-intel-core-i7-2600k-and-core-i5-2500k-tested/2/

แล้วภาคจ่ายไฟ 24เฟส ควรใช้ PSU กี่วัตต์ครับผม ช่วยแนะนำด้วยครับ ขอบคุณมากๆครับ


ภาคจ่ายไฟนี่มันไม่เกี่ยวว่าต้องใช้psu เท่าไหร่หรอกครับ ยิ่งเฟสเยอะๆ มันก็จะทำให้เสถียรภาพของระบบเมื่อ overclock ไปมากๆ ดีกว่าครับ อีกอย่าง มันจะมีแนวโน้มให้ลากได้ไกลขึ้ครับ
บันทึกการเข้า
Judas Iscariot
Vmodtech Member
*****
ออฟไลน์ ออฟไลน์

กระทู้: 1405


ใต้ฟ้า..บนดิน..เหนือทะเล..

facebook.com/profile.php?id=100001451555543
« ตอบ #29 เมื่อ: 10 มกราคม 2011, 23:04:38 »

ใครมันซื้อ i7 ไปหมดพันธุ์ทิพย์ฟร๊ะ หายากชิ..หาย   ::190209:: ::190209:: ::190209::



บันทึกการเข้า



โลกเรามีคนสองประเภท คือพวกที่ทำดีแล้วโดนด่า กับพวกที่ไม่ทำห่าแล้วด่าอย่างเดียว
หน้า: 1 [2] 3 4 ... 6   ขึ้นบน
  พิมพ์  
 
กระโดดไป: